Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0 Linux version 3.3.0-rc3-00198-g1965233-dirty (lentinj@bunsen) (gcc version 4.4.5 (Debian 4.4.5-8) ) #125 PREEMPT Sun Feb 12 14:19:42 GMT 2012 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: D-Link DNS-320 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: mtdparts=orion_nand:1M(u-boot)ro,2M(uImage),-(root) console=ttyS0,115200 rw panic=10 ubi.mtd=root root=ubi0:rootfs rootfstype=ubifs PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 124180k/124180k available, 6892k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc04b5b04 (4791 kB) .init : 0xc04b6000 - 0xc04dd000 ( 156 kB) .data : 0xc04de000 - 0xc05064e0 ( 162 kB) .bss : 0xc0506504 - 0xc05972d4 ( 580 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:114 gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0 gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1 sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms Console: colour dummy device 80x30 Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0x3a5490 - 0x3a54cc NET: Registered protocol family 16 Kirkwood: MV88F6281-A1, TCLK=166666667. Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. PCI-E Device ID: MV88F6281, configuring power-off dnskw: Setting power-recover on bio: create slab at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. msgmni has been set to 242 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A brd: module loaded loop: module loaded sata_mv sata_mv.0: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 21 ata2: SATA max UDMA/133 irq 21 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 77 at 0x0000009a0000 Bad eraseblock 532 at 0x000004280000 3 cmdlinepart partitions found on MTD device orion_nand Creating 3 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000300000 : "uImage" 0x000000300000-0x000008000000 : "root" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 ata1: SATA link down (SStatus 0 SControl F300) UBI: max. sequence number: 420 UBI: attached mtd2 to ubi0 UBI: MTD device name: "root" UBI: MTD device size: 125 MiB UBI: number of good PEBs: 998 UBI: number of bad PEBs: 2 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 998 UBI: number of PEBs reserved for bad PEB handling: 9 UBI: max/mean erase counter: 1/0 UBI: image sequence number: 764960474 UBI: background thread "ubi_bgt0d" started, PID 488 mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:50:43:a8:0c:0e ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver mousedev: PS/2 mouse device common for all mice rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 i2c /dev entries driver gpio-fan gpio-fan: GPIO fan initialized Orion Watchdog Timer: Initial timeout 25 sec cpuidle: using governor ladder cpuidle: using governor menu oprofile: hardware counters not available oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Registering the dns_resolver key type input: gpio-keys as /devices/platform/gpio-keys/input/input0 rtc-mv rtc-mv: setting system clock to 2000-07-23 05:32:41 UTC (964330361) ata2: SATA link down (SStatus 0 SControl F300) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 125669376 bytes (122724 KiB, 119 MiB, 974 LEBs) UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: zlib UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:11. Freeing init memory: 156K